The fishing method for
black sea bream, which has been popular as a target for fishing in Osaka Bay, which has been popular for a long time, has been updated with a lure. It is “chining” aiming at.
Recently, we often hear the word chinning as a fishing that has been updated so that it can be caught “with a lure”, “easily”, and “anyone”.
The Tapiyota Boat Guide also introduces black sea bream fishing as a good target to easily enjoy the real thrill of fishing from Osaka city.
Regarding such a chinning game, taichi69nz, an expert in chining among the Tapiyota Grand Boat Club, has put together a video of “Chinning no Iroha” as [Chinning University].
He thoroughly explains how to aim, the tackle you need, how to find points, how to cast, and how to match.
About free rigging
It can be said that “chining”, which has recently attracted attention, is quite popular.
Although it is often introduced on TV, free rigging is a relatively new type of fishing, and there are still few people who have actually caught it! ?
This time, I will tell you the basics of free rigging that will get you to catch the first fish.
About free rig tackle
| rod | 7 feet (2.13 m) for hill (shore fishing), ML rod around 6 feet for boat (offshore fishing). |
| reel | To be honest, anything over 20,000 yen will cause less trouble. My personal recommendation is Calcon bfs. |
| line | pe:0.8 |
| leader | About 16 pounds (size 4) |
About the rod
The rod is important because the free rig tackle needs to hit the bottom frequently and match the bite immediately due to the characteristics of the invitation.
Recently, rods dedicated to chinning have also appeared from Daiwa and others.
Bass rods, which have many rods in the category of bait finesse, can also be substituted.
About the reel
It is possible to use bait or spinning. Spinning has been used in the past because it is a fishing that throws a lightweight gimmick of 5g to 10g far, but in recent years, bait reels are used in the chining scene because bait reels dedicated to “bait finesse” such as shallow groove spools have appeared. It’s getting more and more.
Introducing the Taichi69nz tackle
| rod | Resid Design Wildside WSC610L + |
| reel | Calcatta Conquest BFS |
| line | Yotsuami G-Soul 0.8 |
| leader | Seager No. 4 16 lbs |
Recommended lures for free rigging
Free rigging Recommended worm/setting
| worm | Keitech Crazy Flapper Strong Hog, Caterpillar, Shad Tail |
| hook | 1 or 2 offset recommended |
| sinker | About 3-10g of tungsten is recommended |
The introduced free rigging iron plate lure
crazy flapper (KEITECH)
drive hog (O, SP)
silver wolf urban shrimp (DAIWA) hook offset hook for
bass
fishing is recommended.
The sense of size is more important than you think, and if the sense of size does not match, you may not be able to ride even if you have a part-time job, or it may be the cause of being found out.
The reason why the sinker
lock is important is that the principle of free rigging is
“fishing by dragging the bottom of the point of rough terrain and pumping the bottom”.
The sinker first lands on the bottom, and the hook sits above the sinker, making it possible to perform action and pull without snagging even on rough bottoms. And this brings about fishing results that could not be achieved with conventional bait fishing and black sea bream fishing.
Understanding the principles of fishing methods may be the key to successful fishing
How to choose free rigging points
How to choose a free rigging point
The basic lure action for flirligchining is bottom pulling or bottom pumping. If the water is too deep, it will be difficult to pull the bottom, and if the water is too shallow, bottom fishing will be impossible. However, black sea bream often land in unexpectedly shallow places.
I think you can see them pecking at mussels at shallower depths than you might think.
In the part that was emphasized in the video, the most important point is
“a place where a shallow water with a depth of 50 cm and a place with a depth of 3 m or more are adjacent”
. (Bottom) looks good.
We recommend this topography, which is common in estuaries and harbors in Japan.
It seems to be a good place to be affected by the ebb and flow of the tide in the same way as the sea.
Free rigging Timing for catching fish
①Mazume and Evening Mazume Brightness change
②How long the tide flows even a little Change in oxygen level
③Water depth of 50 cm or less Change in water depth
④Water temperature above 12 degrees Change in water temperature
This can be said for fish in general and animals as a whole, but the tension changes considerably depending on the timing of changes in the sunlight. In the morning, the activity of the fish will be high at the moment when the morning sun comes out . If you go with the current, you can often catch
black sea bream even when there is no current (tide)
. Also, let’s keep in mind the change in water depth such as shallow water → 3M place explained earlier as a timing (point) where black sea bream can be caught
well .
The reason why you can catch black sea bream and other fish in the morning and evening mazume is that the activity of fish increases due to changes in the amount of light.
By the way, when the water temperature is 12 degrees or higher , the sea bream becomes more active. In Osaka Bay, the water temperature in the middle of winter can reach around 8 degrees. For beginners, it may be recommended to start from May to June when the water temperature is suitable.
[Problem] Around this tide, what time should I enter the point?
I would like to get to the point around 5:00 and concentrate on fishing around 7:00 when the high tide and light intensity change. In addition, I think that it will be hungry from 9:00 to 11:00 at the timing of lowering.
How to choose a free rigging lure
(1) Adjust
lure color and strength of water pressure by adjusting the amount of light and turbidity
(2) Change the weight of the sinker according to the depth and flow of the water
(3) Let the field rest rather than lure change
As is often said in fish introductions, black sea bream is famous as a wary fish .
Therefore, the point is to get into a place where you can cast as far as possible from the point where Chinu is . Also, if you can’t catch a fish even after reattaching the boat several times or casting a lure to the point, you
can catch it by letting the point rest for a while and then restarting fishing instead of repeating it over and over again.
I think that people who are good at fishing are able to enter (cast) at “good timing” and “good points” .
Things to keep in mind when actually performing free rigging (summary)
(1) Not too close to the point
It is important to grasp the point where you can catch firmly in advance as it is an important job for guides and captains.
(2) If possible, the sound of landing on the water should be as small as possible
. Even a shadow can run away, so pay attention to the water landing sound when casting.
(3) You can tell whether the tackle is balanced
so that you can hit the stone firmly and “get the bottom” or if it is too heavy to feel the stone. . (4) It is important to have a feeling that the line is not stretched too much in order to produce a natural movement for lure fishing. ⑤ As soon as you hit it, the characteristic of Awasechinu is that when there is a hit, it will “immediately match”. There are several types of offset hooks, but we recommend No. 1 or No. 2, which matches the size of your mouth.
How to catch black sea bream “Kon: Tsu” “Bashitsu” Chinu fishing that matches the ground is irresistible ~
LINE友だち会員募集中
LINE公式アカウントでタピヨタグランボートクラブメンバーに登録いただくと、イベントや乗船予約が簡単にご利用いただけるほか、お得な情報やクーポン、スタンプ会員カードがご利用になれます。
- 各種イベント・乗船予約
- お得なイベント情報
- ご利用内容に応じたクーポン配信
- スタンプ
